Print in Place Inline-3 par Alexander_3d

Modèle de
loading...
Description du modèle
3D model of turbo_sunshine
The models were repaired and checked for printability.

This is a print in place model, meaning there is no assembly...Plus required!

Important:
-Use 0.2mm layer height (or finer)
-Use a 0.4mm Nozzle (or finer)
-No Support
-No horizontal expansion compensation!

Rafts:
No

Supports:
No

Resolution:
0.2

Infill:
20
https://www.instagram.com/sunshine_turbo
À propos de l'auteur de ce modèle
33 modèles uploadés
Profil validé