Foto 8.9

Foto 8.9 #0

Properties

Build Volume 192 x 120 x 200 mm
Layer Resolution Low 200 microns
Layer Resolution High 25 microns
Print Speed Min. 10 mm/h
Print Speed Max. 50 mm/h
MarqueFlashForge
Type de Machine 3D Printer
La technologie DUP (LCD-based Direct UV Printing)
Matériaux Gypse, Castable Resin, Tough Resin, Flexible Resin
Site Internethttps://www.flashforge.com/product-detail/flashforge-foto-8-9-3d-printer
Prix ​​moyen Contacter le fabricant

À propos Foto 8.9

Foto 8.9 is a desktop resin 3D Printer from FlashForge. It uses a 8.9" 4K LCD screen for masking, making the machine produce parts with impressive speeds. And the build volume of 192 x 120 x 200 mm provides a lot of room for parts of all sorts. Foto 8.9 has a stable Z axis and print cooling.

Features:

  • USB connectivity;
  • Shipped assembled;
  • Printing cooling;
  • 3.5" touchscreen;
  • 4K LCD display for curing.
Check price on Affiliate

Structure and Design

Foto 8.9 3D printer has a sleek design, and, upon the first glance, looks a lot like other machines of this type on the market. There you have your plastic cover and dual Z-axis, control screen on the bottom and VAT with FEP film. But looking closer, there are some nice touches and overall decent components that went into the printer.

For starters, Foto 8.9 is heavy and solid all the way around – the bottom of the machine is heavy, which makes it less prone to wobbling. Z-axis, including the handle for the build plate is solid metal with great thickness – which, again, means fewer disturbances during printing process.

The plastic cover on the machine is quiet thick and rigid, too. Though, a small downside is that FlashForge went with a really dark shade for that one, so the cover ended up not being see-through. This tiny detail makes it hard to monitor the printing process.

The build plate in Foto 8.9 is not sanded but it has a rough texture to it, which helps prints to adhere to the plate. A small heads up is that at the center of the plate you can find 4 screw holes, which will come out on a part if printed flat at the center. Another nice touch on the design here – handles, which make it easier to handle your print plate after the process.

Finally, tiny but pleasant design details on the VAT itself. It also has handles, which for the VAT of such a bigger size, is a great help. There are also a few screws that go below the VAT, which act like legs, when you handle it outside the print. This makes changing the resin simply more comfortable and secure for the FEP film.

Hardware

Foto 8.9 runs on a matrix of LEDs, which performs solid across the whole printing area. For masking it uses a 4K screen, which is also a monochrome one. This change now becomes more common across manufacturers of resin printers as monochrome screens provide better light transfer. As a result, the machine prints with greater resolution and speeds.

Évaluations 4.1 1 reviews

Print Quality
Reliability
Ease Of Use
Failure Rate
Running Expenses
Software
Build Quality
Value
Customer Service
Community
1 févr. 2024
This printer is capable of so many details in 4k. This is a perfect solution to any project that requires high details.